top of page
A thermistor is a type of resistor whose resistance is dependent on temperature, in that NTC (Negative Temperature Coefficient) thermistors, resistance decreases as temperature rises. An NTC is commonly used as a temperature sensor, or in series with a circuit as an inrush current limiter.
​
Many NTC thermistors are made from a pressed disc, rod, plate, bead or cast chip of semiconducting material such as sintered metal oxides. Thermosen NTC thermistors are popular for its consistant and reliable output, we get experince and capabality to design custom NTC thermistors beside our regular range. Here is some of the running type of NTC's
KEY FEATURES
Bead NTC thermistor with UL approved insulated 26 AWG wire suitable in work environment of -40 to +105°C. Standard 10K NTC with Beta Value 3977 at (25/85)°C in good tolerance of ±1%.
These sensor find application in T&M, Medical, Motor winding, Power Electronics, PCB, EV's and more.
Thermosen have inhouse capability to customize sensor to match customer needs.
Connector Type/ Strip Length (mm)
Wire Length (mm)
Resistance value, 10kΩ
Resistance Tolerance (%)
Beta Value
TNAEB-103-R1-BD-Lxxx-Cxxx
Series
Epoxy Type
Assembly
NTC
THERMOSEN
Connector Type/ Strip Length (mm)
Wire Length (mm)
Resistance value, 10kΩ
Resistance Tolerance (%)
Beta Value
TNAEA-103-R1-BD-Lxxx-Cxxx
Series
Epoxy Type
Assembly
NTC
THERMOSEN
KEY FEATURES
Smaller bead NTC thermistor with UL approved insulated 28 AWG wire suitable in work environment of -40 to +125°C. Standard 10K NTC with Beta Value 3977 at (25/85)°C in good tolerance of ±1%.
These sensor find application in handheld T&M, Medical, Motor winding, Power Electronics, PCB, EV's and more.
Thermosen have inhouse capability to customize sensor to match customer needs.
KEY FEATURES
Small non-insulated bead NTC thermistor with leaded wire suitable in work environment of -40 to +125°C. Cost effective sensor for PCB throuh hole mounting, Standard 10K NTC with Beta Value 3977 at (25/85)°C
These sensor find application in UPS/ Inverter, charging ports, ambient temperature sensing and more.
Thermosen have inhouse capability to customize sensor to match customer needs.
TNBTE-xxx-Rx-Bx-Lxxx-Cxxx
Thermistor
TNT-10052
KEY FEATURES
Bead NTC thermistor with UL 10503 insulated 28 AWG wire suitable for -40 to +135°C applications. Wide range of choice in resistance, beta value and tolerance to match custom requirement. Choose the product from datasheet
These sensor find application in handheld T&M, Medical, Motor winding, Power Electronics, PCB, EV's and more.
Thermosen have inhouse capability to customize sensor to match customer needs.
Connector Type/ Strip Length (mm)
Wire Length (mm)
Resistance value, 10kΩ
Resistance Tolerance (%)
Beta Value
Epoxy Type
Bead Type
NTC
THERMOSEN
bottom of page